Have been swamped with school projects, tests, hw, and finals. so i will not have prototype by maker fiare
also i might not even be able to attend or show at maker faire as i have a very critical final on the 22nd the day after maker faire
i just got in the hall effect sensors and the rare earth magnets
so i will need to implement that code into the program as well
summer is coming up on 5/25/2017
then i will be be back to the green engineers stuff
however i will need to take a summer class and might do a internship to get some money to get a small place to organize my stuff
again thanks for your patience
check bellow for pictures
Cut some test pieces this weekend at tech shop redwood city
They came out pretty good. except a few problems that will need to be adjusted
I now need to come up with a better way of knocking off the dross/slag
The software that generates the gcode at redwood city's torchmate is ancient and garbage
I will need to figure out how to leverage fusion to get better cuts. and use vcarve pro 8.5 to do nesting into whatever size of plate i have
next i will be working on modifying the fusion files to adapt what i learned from the test cuts
next weekend i plan on cutting out an entire shredder in A36 for first steel prototype.
check out bellow for all the pictures that i have taken from the cutting process. going to take some more close up shots of the parts i will add those when i take them
Started to fall behind in school a little bit so had to devote some more time to it.
So haven't devoted much time int o project but i am going back into now.
going to have a new printer in less than 10 days.
i am building a 18" x 18" x 18" build volume printer out of the car case of my old kossel.
Maker faire is coming up in 2 weeks.
i actually have a final that monday after maker fair and i is a difficult class so i am not sure i am going to be able to make it.
I will do what i can to make it to the faire and hopefully have a mock up there of the multistruder
most of the 3d prints are ready to go
i need to print another roller and glue the bearings into the pulley and both of the dimensional control rollers
then assemble one
I have taken the cnc plasma cutter class at tech shop redwood city.
The cuts it does are quick but pretty rough and will need finishing by hand filing and buffing.
However, i learned that tech shop redwood city also has a small heat treating oven for knives that looks like it would be big enough for at least one shredder at a time to heat treat then temper.
I will be doing some testing on that with a gear that i cut and some hardness testing files to see what type of hardness i can put out.
So i will work on a price and make that available for you guys as well. When i am done testing.
I am going to be in contact with my supplier to tell them that i am going to be purchasing a 1/4 inch 1045 about 4"x4" sheet
Also i am going to head out there this weekend with some A36 and do some test cuts as that should be pretty similar to the 1045.
Also i will try to harden a piece of A36 and it probably wont work.
we are really close to getting a prototype cut and finalized to run into production and possibly some heat treating of a few if you guys desire.
Check out pictures bellow.
Got in 30 metal bearings.
Have been finalizing all of the rotating 3d printed pieces to use these bearings
been getting some gorgeous prints off of my personal kossel 3d printer at home if printing very slowly.
have updated the pulley and the dimensional control rollers to use the bearings so far
I have purchased the hall effect sensors and some rare earth magnets to monitor rpm to check speed and also enhance the auto extrude algorithm.
Trying to get a prototype built to premiere at Maker Faire Bay Area this year. event is may 20th
Bellow you will see my prints that are using the new metal bearings bellow
check out pictures bellow
CNC Plasma Cutter Redwood City appointment coming up soon
About time to purchase the plate of 1045 steel
I machined the jig for the A36 for cutting out of the tormach
It was machined out of HDPE Starboard.
It is a jig to mount 2 4" x 12" x 1/4" A36 Plate to be cut and held down in the tormach. so when i swap in the next pair of A36 plate in i dont have to rehome the tormach
plate purchase coming up. Bearings as well, as well as drive square bar. Stay tuned
First cuts coming very soon.
Check out pictures below.
Ordered the hall effect sensors and the magnets for rpm speed detection to better increase the percision of the automatic algorithm
tech shop is back open
going back to start printing the pieces after a final double check of the models.
will also buy some more filament. Im going to try 3dxtech brand i think.
bearings have not come in yet
maker faire bay area is coming up and i will be a presenter there again this year. hopefully i will have the first one built and running before then. maker faire is in mid may
alot more coming soon now that tech shop is back open. As my printer is just not reliable right now.
TechShop is still closed. They failed an inspection so new reopen date is 4/5/2017 (tomorrow) instead of 4/1/2017
Bearings for dimensional control rollers,pulley have been purchased. I am going to try to get those to work with the spooler
A lot of models edited im getting closer
As stated in last blog the beta version of the software is finished so waiting to install on first unit
Most of the rest of the printing will be completed at TechShop on the replicator 2 because as of right now it is more reliable than my printer at home.
Now i am trying to source some rubber or cork to rap around the piece that drives the spool on the spooler module.
I am also going to source some hall effect sensor.
More pictures when i finalize more of the models and begin printing. or when i get in some of the stuff i purchased.
TechShop is still closed. They failed one of their inspections so the re-open date has been pushed back to 4/5/2017 instead of 4/1/2017
I have signed up for the cnc plasma class. issue is that the closest class i was able to sign up for is 4/28/2017
I have been calling in for every class from now to 4/28/2017 if a seat come available that i could fill in between now and then.
When TechShop San Jose reopens i will be moving forward with the template for the A36 shredders to be able to mill out. even though that process will take like 6-7 hours to make 1 shredder
In the mean time i have been looking to buy some heavy duty flange bearings so i can adapt my model to accommodate them.
Then buy the square drive shafts for machining. Or source hexagon shafts
On spring break. back to school on Monday
redesigned a lot of the 3d models and printed alot of prototypes
tech shop san jose is closed down for move to 2x bigger location re opening on april 1st
some models will need to be printed at techshop over night because of long print times
software beta finished and ready to be installed
decided to buy metal ball bearings from china so those are on the way and redesigning the models to accommodate those new bearings.
now i need to buy some metal springs and thrust bearings and i think we are good to go.
check out pictures bellow.
Techshop San Jose is now closed for move to the new twice as large location
I was preparing to machine a template for machining the 4" x 12" inch A36 plates. However something new came up
Tech Shop Mid Peninsula in Redwood City just got the permits for their cnc plasma cutter to be used again
This is a great development. This will decrease the time for cutting the shredder by about 11 times. which drastically increases my speed for production
However one thing that I will have to deal with is the quality of cut. the quality of cut is not going to be as good as a water jet or the mill. As technically the plasma cnc cutter is the worst quality of cut all cnc machines. as plasma cnc machines are built for speed not quality of cut.
The plasma cnc machine will leave dross. and more taper than the other cnc machines. so I'm predicting a lot more cleanup than the mill.
qThe Bad is that the class to learn the machine is full until the 20th of next month. I am working to getting into a class or checked off on the machine asap.
So I will be just buying the 1045 steel 4' x 8' x .25" plate (does 8.5 shredders). and start cutting. if everything checks out we are ready to rock and roll
Again thanks for your guys patience. it is coming
check out pictures bellow for some pictures of example cuts from the cnc plasma cutter.
I will be finished with last part of code for beta today.
Now Just double checking the 3d cad models and start printing them at home.
I am now on spring break tell 4/3/2017
TechShop San Jose is now closed for move to twice as big facility. they will be back up in about 10 days back in new facility.
We are still moving ahead. even more progress to happen while on spring break.
Printed a whole bunch more of the dimensional control brackets
Started to work on the code. i will do more this friday try to finalize a beta asap
Need to source some springs for the dimensional control brackets
only small pieces remain to be printed.
I will be without tech shop from march 23rd for about 10 days. (As of this writing)
pretty much all electronics have been ordered just printing remaining and coding remain
Check out pictures bellow of the dimensional control brackets and the extension wires that have arrived
Printed the correct setup of the dimensional control. it turns out that the rollers need to be alot smaller in order for the filament to drop from the nozzle right through the rollers
The wire extensions have come in to reach from the dimensional control and spooler to the control box
Hall effect sensors and magnets will be ordered soon.
dimensional control modules print time is now 100 minutes so i can do 2 and some other prints in the 4 hour blocks of time i am a located.
Programming to continue this Friday so that i can print all the final pieces i need to assemble one unit and debug the code.
We are getting close to having a unit that prints perfect filament every time.
Check out pictures bellow.
Purchasing the hall effect sensors and the magnets this weeekend.
Makerbot should be back up with brand new extruder this weekend.
back to printing next week.
and making software this friday.
and extension cables are on their way
1st. Techshop has pushed back there close date AGAIN from March 2nd to March 23rd.
this has 2 effects. 1 positive 1 negative
Got more time to work on setup on cam.
However, the negative is that i will not have access to the water jet till the 23rd plus 10 days for them to close and move everything.
After pricing out the steel i have found out that buying the pre cut plates of steel is extremely expensive
The best option is to buy 4' x 10' giant sheets and cutting out the plates from the sheets on the water jet. that is what i am going to be using in production. and also it is cheaper for prototype
Im still contemplating taking some A36 out of my garage and welding the smaller plates into bigger plate and grind the welds flat
however i dont think that that will make a very good functional prototype. Im still probably going to do so because i need to get rid of that 1/4 inch steel
Now i have a chance to make the template or jig out of plastic so i can instantly home every sheet i put in in order to swap them out quickly. As each machine takes 3.5 sheets
I have gotten an estimate for machine time. It came in at 5.5 hours minimum per shredder. my estimate was 2.5 hours. so the price of the shredder if not pre-ordered before first prototype will see a more drastic price increase than originally expected.
so in the mean time shopbot out the jig and check the fit on the tormach. and double check the cad file and save the cam for the tormach. and maybe try some A36
Was not able to start printing because of more problems with techshops makerbot.
because of these continual problems i am going to be looking for my own large format printer
began looking at hall effect sensors. and with their cheap price i should be able to implement it into the design as well with a hall effect sensor and magnet combo.
wasnt able to upload images of overhang test last week so i will do so this week.
check out pictures below.
Bought the wire jumper pins for the load cell board to the arduino
Bought the rest of the wire needed for wiring up the rest of the units
bought the rest of the bolts needed for the units
tested out the overhang print for the dimensional control bracket (picture bellow). Overhangs came out pretty good. not perfect but pretty good. so i should be able to print without supports. however the model still needs a little more manipulation before its done.
almost ready to do the software and then test to make sure it works then start building the units one by one to send out.
after i build the first dimensional control unit i will be able to assemble one for electronics testing.
Check bellow for pictures.
Finished printing the spooler brackets
Starting on the prints for the finished dimensional control brackets. i am going to be trying to print it on the makerbot rep 2 without supports for quicker print times
Finishing it up and getting ready for software and starting to put them together to get ready for testing and boxing up
buying extended jumper wires and maybe find some hall effect sensors and magnets to glue on the dimensional control rollers to determine the extrusion rate
I have taken all the preq steps to get me to the place when i am ready to machine a prototype
I have sat in on the classes i need for the Tormach at tech shop and my current (temporary) cam software VCarvePro 8.5
I currently have the prototype shredder nested out in VCarvePro 8.5. ready for 2D routing cam
i need to call up my supplier to get some A36 in a 10.5" x 19" x 1/4" plates. and maybe my first 1045 steel 10.5" x 19" x 1/4" plate for first shredder
I found out that i will need 3.5 plates of 9.5" x 18" x 1/4" plates per shredder and my estimated time is to be about 130 minutes minimum for machining not including changing plates
Because i will find extra expenses in the manufacturing after i manufacture my first prototype i will realize some of these extra expenses and i will increase sale price to reflect that
Also when i begin manufacturing the 3 shredders i will also discover the manufacturing the final production of machining and those expenses will also reflect that.
So if you have not yet purchased a shredder yet now is the time to do it as this will be the cheapest you will ever find it. after these other 2 points price will increase in according to increase in costs and plugging it into a equation i made so increase cost will not be known tell it is calculated.
stay tuned as next update will probably be pictures from the prototype machining process.
Back into the full swing of school now
3d printing 3-4 times a week now. Still printing the spooler brackets. and only a few more left to go
then i need to print the dimension control bracket.
finished assembling the electronic boards
i am doing some construction at my parents place so that will cause me to be a little more disorganized
Things are moving forward more quickly now that techshop has pushed back their close date and that date should be more stable now
Techshop has pushed back their hard close date twice since last update.
the new hard close date is now March 2nd
Techshop is now only going to close for one week in after march 2nd
that being said I have begun to continue forward on the metal prototype.
I have setup a vcarve 8.5 pro file at tech shop that has been setup for the max travel for the tormach
now I just need to generate the routing toolpath for the tormach.
and I have to take the tormach class to get associated with the machine
then machine a prototype. make improvements from prototype then we are good to go into production.
I am back to school now and will talk to my instructor about possible housing of a kiln to heat treat the shredder and then price that out.
then I will begin work on the funnel/shroud and motor attachment.
Techshop was able to push back there hard close date from 1/24/2017 today to 3/2/2017. on 3/2/2017 they will be closing for a week to move the equipment and then reopen as the construction should be finished they just need to move the equipment. Well that is the plan
got my next roll of filament in and i am continuing to print out the spooler brackets. maybe 5 more left to print. they take a long time as they are 3.5 hours each. i am going to team up with a few people here at tech shop to get them printed faster.
just a few more parts left to purchase and print and then we are ready to push out the units to international.
i am starting school on the 26th (2 days from now) but i will be spending time after school at tech shop printing what needs to be finished printing and working at other projects aswell.
thus i will be back to part time but i think i will be spending more time on it that i have when i am on break (full time) as i generally have to help family out with other projects and holidays etc.